Joint-LOCKpietra Closeout, 1.4 x 36.0 x 2.8 inches (35 x 915 x 7 mm), DMPI-04

Joint-Lock pietra closeouts [Precautions] Uses the same pattern as JOINT-LOCK pietra. Due to the design, there are dark and thin ones with the same product number and lot. Installation Method: 1. Cut the dedicated closeout material. Measure the length you need and cut a few times with a utility knife on the surface of the closerer. Next, press the slit to make the corners of the table or other like the fulcrum. Sanding the cross section with sandpaper #320 for a clean look. 2. Preparation before applying the special double-sided tape Please clean the dust and oil on each side of the joint-lock pietra, and allow it to dry thoroughly. 3. Attach the special double-sided tape to the dedicated closeout material. On the back of the closeout material overlaps JOINT-LOCK pietra, apply the special double-sided tape as shown in the picture, and press it firmly with your finger. 2 rows of adhesion for stronger adhesion. 4. Stick to JOINT-LOCK pietra. Peel off the backing paper of the special double-sided tape attached to the closeout material and stick it to JOINT-LOCK pietra. When everything is finished, place it on top of the closeout and step on the entire surface for a strong crimp.

• This is a close-up material for "JOINT-LOCK Pietra"
• Easy to apply with "JOINT-LOCK double sided tape (sold separately)
• Uses: For cutting steps exclusively for "JOINT-LOCK Pietra"
• Weight: Approx. 7.1 oz (200 g) per